{"title":"Differential Pressure Transducers","description":"","products":[{"product_id":"integral-orifice-dp-flow-meter-run-assembly","title":"Integral Orifice DP Flow Meter Run Assembly","description":"The integral orifice meter run assembly is a \u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/flow-wastewater\/differential-pressure\/\"\u003edifferential pressure flow meter\u003c\/a\u003e for the \u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/\"\u003emunicipal water and wastewater industry\u003c\/a\u003e. They're specifically designed for smaller line sizes where the surface roughness, weld seams, and other geometrical imperfections have a relatively big influence on the \u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/flow-wastewater\/\"\u003eflow measurement\u003c\/a\u003e uncertainty. This DP flow meter, from \u003ca href=\"https:\/\/psctexas.com\/brand\/krohne\/\"\u003eKROHNE\u003c\/a\u003e, features a minimum length of upstream and downstream pipe. Thus, it reduces additional uncertainties of the installation to a minimum. This DP flow meter is suitable for process and allocation measurement of gases and liquids such as viscous fluids, fluids with suspended solids, or fluids with gas entrainment. We offer the complete orifice assembly with orifice meter run, DP transmitter, valves, accessories, engineering, and documentation. This DP flow meter comes pressure tested and ready for commissioning. The meter run is available in various designs and is compliant with the requirements of the \u003ca href=\"https:\/\/www.iso.org\/standard\/79179.html\" target=\"_blank\" rel=\"nofollow noopener\"\u003eISO 5167\u003c\/a\u003e, such as pressure tap orientation and dimensions. It is fully machined and straightened to meet the highest dimensional expectations. If necessary, we can provide an additional calibration in line with the final operating conditions. We also supply special constructions such as redundant taps, integrated flow conditioner, certain paint specifications, or advanced NDTs from one source and in accordance with relevant standards (ISO 5167, etc.). \u003ca href=\"https:\/\/psctexas.com\/product\/optibar-dp-7060-dp-transmitter\/\"\u003e\u003cimg class=\"alignright wp-image-25936 size-full\" style=\"width: 300px;\" src=\"https:\/\/psctexas.com\/wp-content\/uploads\/2018\/07\/KROHNE-optibar-dp-7060-differential-pressure-dp-flow-measurement-meter-process-solutions-corp.png\" alt=\"KROHNE-optibar-dp-7060-differential-pressure-dp-flow-measurement-meter-process-solutions-corp\" width=\"500\" height=\"500\"\u003e\u003c\/a\u003e \u003ch3\u003eOPTIBAR DP Flow Meter\u003c\/h3\u003e The sophisticated \u003ca href=\"https:\/\/psctexas.com\/product\/optibar-dp-7060-dp-transmitter\/\"\u003eOPTIBAR DP 7060\u003c\/a\u003e and the compact \u003ca href=\"https:\/\/psctexas.com\/product\/optibar-dp-3050-dp-pressure-transmitter\/\"\u003eOPTIBAR DP 3050\u003c\/a\u003e DP transmitters are the perfect companion for this DP flow meter solution. They are 3D linearized and ensure advanced performance even at high static pressures. Furthermore, the OPTIBAR DP series has outstanding long-term stability and a low total cost of ownership with a reduced need for field calibrations. \u003ch3\u003eFeatures of the Integral Orifice DP Flow Meter Run Assembly\u003c\/h3\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003estandardized calibrated orifice assembly for high accuracy requirements\u003c\/li\u003e \u003cli\u003edesign according to ISO 5167 as well as ISO TR 15377 from DN15 to DN100 (0.5 to 4\"), other sizes and designs on request\u003c\/li\u003e \u003cli\u003eelimination of additional uncertainties due to installation effects\u003c\/li\u003e \u003cli\u003elow TCO (Total Cost of Ownership) due to reduced engineering, commissioning, and installation costs\u003c\/li\u003e \u003cli\u003ereduced need for recalibration in the field through advanced 3-D linearized OPTIBAR DP transmitters\u003c\/li\u003e \u003cli\u003ecomplete DP flow meter solution with orifice meter run, manifold, DP transmitter, sizing, and documentation from a single source\u003c\/li\u003e \u003cli\u003eredundancy available (1oo2, 2oo3)\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/psctexas.com\/product-tag\/hart\/\"\u003eHART 7\u003c\/a\u003e, \u003ca href=\"https:\/\/www.fieldcommgroup.org\/technologies\/foundation-fieldbus\" target=\"_blank\" rel=\"nofollow noopener\"\u003eFOUNDATION fieldbus\u003c\/a\u003e, and \u003ca href=\"https:\/\/www.profibus.com\" target=\"_blank\" rel=\"nofollow noopener\"\u003eProfibus-PA\u003c\/a\u003e communication options\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.ul.com\/services\/functional-safety\" target=\"_blank\" rel=\"nofollow noopener\"\u003eSIL 2\/3 certified versions\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/psctexas.com\/product-tag\/hazloc-rated\/\"\u003eEx ia, Ex d approvals\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eCommon Uses of Differential Pressure Flow Meters\u003c\/h3\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003eDP flow measurement in applications with small pipe diameters\u003c\/li\u003e \u003cli\u003eprocess measurement\u003c\/li\u003e \u003cli\u003eallocation measurement\u003c\/li\u003e \u003cli\u003ecustody transfer (CT) as well as fiscal measurement\u003c\/li\u003e \u003c\/ul\u003e","brand":"KROHNE","offers":[{"title":"Default Title","offer_id":45878364831875,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/1955\/0595\/files\/KROHNE-optibar-7060-dp-flow-meter-Integral-orifice-meter-run-assembly-process-solutions-corp.png?v=1763385176"},{"product_id":"cs84-intrinsically-safe-differential-pressure-transducer-1-50-psi","title":"CS84 Intrinsically Safe Differential Pressure Transducer, 1-50 PSI","description":"The CS84 Intrinsically Safe Differential Pressure Transducer is an industrial quality \u003ca href=\"https:\/\/psctexas.com\/product-category\/pressure\/differential-pressure-transducers\"\u003epressure sensor for differential pressure\u003c\/a\u003e measurements. It's suitable for pressure sensing of liquids and gases in \u003ca href=\"https:\/\/psctexas.com\/ul-standards-for-hazardous-location-industrial-instrumentation\/\"\u003eClass I, Division 1 Intrinsically Safe locations\u003c\/a\u003e. Due to its all welded, \u003ca href=\"http:\/\/psctexas.com\/wetted-materials-options-for-pressure-sensors\/\"\u003estainless steel\u003c\/a\u003e construction, the CS84 offers a minimum \u003ca href=\"https:\/\/psctexas.com\/ip-rating-for-industrial-instrumentation\/\"\u003eIP65 rating\u003c\/a\u003e. A \u003ca href=\"http:\/\/psctexas.com\/wetted-materials-options-for-pressure-sensors\/#316L\"\u003e316L SS\u003c\/a\u003e oil filled sensor element provides excellent stability over a wide operating temperature range. In addition, it offers corrosion resistance against various liquids and gases. Differential pressure ranges up to 50 PSI are available with 1\/4\" MNPT or FNPT process connections. A wide range of configurable options make the CS84 a versatile pressure transducer. Moreover, it's suitable for operation in some the harshest conditions. \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.csagroup.org\" target=\"_blank\" rel=\"nofollow noopener\"\u003eCSA Class I, Division 1, Groups C, D T4 Approval\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003edifferential pressures from 1 PSI up to 50 PSI\u003c\/li\u003e \u003cli\u003eline pressures up to 500 PSI\u003c\/li\u003e \u003cli\u003ebi-directional pressure ranges available\u003c\/li\u003e \u003cli\u003eassembly in New Jersey, USA\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eIntrinsically Safe Differential Pressure Transducer\u003c\/h3\u003e The CS84 Intrinsically Safe Differential Pressure Transducer is the ideal solution for \u003ca href=\"https:\/\/psctexas.com\/product-category\/pressure\/differential-pressure-transducers\"\u003edifferential pressure measurement\u003c\/a\u003e in \u003ca href=\"https:\/\/psctexas.com\/product-tag\/hazloc-rated\/\"\u003ehazardous applications\u003c\/a\u003e. For example, it's ideal for filter condition monitoring, sealed tank \u003ca href=\"https:\/\/psctexas.com\/product-category\/level\/\"\u003elevel measurement\u003c\/a\u003e, and \u003ca href=\"https:\/\/psctexas.com\/product-category\/flow\/\"\u003eflow measurement\u003c\/a\u003e across an orifice. Due to its fully welded design without any internal O-rings or seals, it's well fit for wet\/wet, wet\/dry, or dry\/dry applications. Differential pressures are available from 1 to 50 PSID. In addition, it can provide both uni-directional and bi-directional pressure sensing. Multiple electrical connections and outputs are available. \u003ch3\u003eSpecifications\u003c\/h3\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth style=\"text-align: center;\"\u003ePerformance\u003c\/th\u003e \u003cth style=\"text-align: center;\"\u003eThermal\u003c\/th\u003e \u003cth style=\"text-align: center;\"\u003eEnvironmental\u003c\/th\u003e \u003cth style=\"text-align: center;\"\u003eElectrical (Current)\u003c\/th\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd valign=\"top\"\u003e \u003cp style=\"text-align: left;\"\u003eAccuracy @ 77˚F (25˚C)\u003csup\u003e1\u003c\/sup\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ± 0.25% BFSL\u003c\/li\u003e \u003cli\u003e≤ ± 0.5% BFSL \u003csmall\u003e(2 PSI \u0026amp; below)\u003c\/small\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eStability (1 Year)\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ± 0.25% of FS\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003ePressure Cycles\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e4 million\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eMax Line Pressure\u003csup\u003e2\u003c\/sup\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e500 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eMax Differential Pressure\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e50 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eOverpressure\u003csup\u003e3\u003c\/sup\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e2X or 500 PSI, \u003csmall\u003ewhichever is less, configured differential pressure\u003c\/small\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eBurst Pressure\u003csup\u003e3\u003c\/sup\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e3X configured differential pressure\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003ctd valign=\"top\"\u003e \u003cp style=\"text-align: left;\"\u003eOperating Temperature\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli style=\"text-align: left;\"\u003e-40 to 175˚F\u003c\/li\u003e \u003cli style=\"text-align: left;\"\u003e-40 to 80˚C\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eOperating Temperature \u003csmall\u003e(Electrical connection “F”, DIN 43650-A)\u003c\/small\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e-4 to 175˚F\u003c\/li\u003e \u003cli\u003e-20 to +80˚C\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eMedia Temperature\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e-40 to 257˚F\u003c\/li\u003e \u003cli\u003e-40 to 125˚C\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eMedia Temperature \u003csmall\u003e(Electrical connection “F”, DIN 43650-A)\u003c\/small\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e-40 to 221˚F\u003c\/li\u003e \u003cli\u003e-40 to 105˚C\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eCompensated Temperature\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e32 to 131˚F\u003c\/li\u003e \u003cli\u003e0 to +55˚C\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eStorage Temperature\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e-40 to 257˚F\u003c\/li\u003e \u003cli\u003e-40 to 125˚C\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eTC Zero\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ± 1% of FS\u003c\/li\u003e \u003cli\u003e≤ ± 2% of FS \u003csmall\u003e(2 PSI \u0026amp; below)\u003c\/small\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eTC Span\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ± 1% of FS\u003c\/li\u003e \u003cli\u003e≤ ± 2% of FS \u003csmall\u003e(2 PSI \u0026amp; below)\u003c\/small\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003ctd valign=\"top\"\u003e \u003cp style=\"text-align: left;\"\u003eEMI\/RFI Protection\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003eYes\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eIP Rating\u003csup\u003e4\u003c\/sup\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003eIP65 minimum\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eVibration\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e10 g, 20 to 5000 Hz\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eShock\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e100 g, 11 msec, 1\/2 sine\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003ctd valign=\"top\"\u003eOutputs \u003cul\u003e \u003cli style=\"text-align: left;\"\u003e4-20 mA\u003c\/li\u003e \u003c\/ul\u003e Excitation \u003cul\u003e \u003cli\u003e10-28 VDC\u003c\/li\u003e \u003c\/ul\u003e Current Consumption \u003cul\u003e \u003cli\u003e20 mA, typical\u003c\/li\u003e \u003c\/ul\u003e Output Load \u003cul\u003e \u003cli\u003e0-800 Ohms @ 10-28 VDC\u003c\/li\u003e \u003c\/ul\u003e Frequency Response (min) \u003cul\u003e \u003cli\u003e~250 Hz\u003c\/li\u003e \u003c\/ul\u003e Zero Offset (of FS) \u003cul\u003e \u003cli\u003e≤ ± 0.5% typical, ± 1% max\u003c\/li\u003e \u003c\/ul\u003e Span Tolerance (of FS) \u003cul\u003e \u003cli\u003e≤ ± 0.5% typical, ± 1% max\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd colspan=\"4\"\u003e\n\u003csup\u003e1\u003c\/sup\u003eAccuracy includes non-linearity, hysteresis and non-repeatability. \u003csup\u003e2\u003c\/sup\u003eMax line pressure is the highest common mode pressure that can be applied to the sensor without damage. \u003csup\u003e3\u003c\/sup\u003eOverpressure and burst pressure are the maximum differential pressure that can be applied to the high or low side before damage to the sensor will occur. \u003csup\u003e4\u003c\/sup\u003eIP Rating is dependent on electrical termination selected. Contact factory for more information. IP Rating applies when electrical connector is attached with the appropriate ingress protection.\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch3\u003eModel Number Configuration Guide for CS84 Intrinsically Safe Differential Pressure Sensor\u003c\/h3\u003e \u003ca href=\"https:\/\/psctexas.com\/wp-content\/uploads\/2019\/06\/CS84-configuration-intrinsically-safe-differential-pressure-transducer-core-sensors-psc-texas.jpg\"\u003e\u003cimg class=\"aligncenter wp-image-23667 size-full\" src=\"https:\/\/psctexas.com\/wp-content\/uploads\/2019\/06\/CS84-configuration-intrinsically-safe-differential-pressure-transducer-core-sensors-psc-texas.jpg\" alt=\"CS84-configuration-intrinsically-safe-differential-pressure-transducer-core-sensors-psc-texas\" width=\"1000\" height=\"354\"\u003e\u003c\/a\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cul\u003e \u003cli\u003efiltration\u003c\/li\u003e \u003cli\u003eexternal fuel tank \u003ca href=\"https:\/\/psctexas.com\/product-category\/level\/\"\u003elevel measurement\u003c\/a\u003e\n\u003c\/li\u003e \u003c\/ul\u003e","brand":"Core Sensors","offers":[{"title":"Default Title","offer_id":45878365094019,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/1955\/0595\/files\/cs84-IS-intrinsically-safe-differential-pressure-sensor-core-sensors-psc-texas.png?v=1763385187"},{"product_id":"cs14-wetwet-differential-pressure-transducer-1-300-psi","title":"CS14 Wet\/Wet Differential Pressure Transducer, 1-300 PSI","description":"The CS14 Wet\/Wet Differential Pressure Transducer is ideal for various applications including filtration and tank \u003ca href=\"https:\/\/psctexas.com\/product-category\/level\/\"\u003elevel monitoring\u003c\/a\u003e. A \u003ca href=\"http:\/\/psctexas.com\/wetted-materials-options-for-pressure-sensors\/#316L\"\u003e316L SS\u003c\/a\u003e oil filled sensor element provides excellent stability over a wide operating temperature range. In addition, the CS14, from \u003ca href=\"https:\/\/psctexas.com\/brand\/core-sensors\/\"\u003eCore Sensors\u003c\/a\u003e, offers corrosion resistance against various liquids and gases. Its \u003ca href=\"https:\/\/psctexas.com\/product-tag\/compact-design\/\"\u003ecompact design\u003c\/a\u003e makes the CS14 a perfect solution for \u003ca href=\"https:\/\/psctexas.com\/product-category\/pressure\/differential-pressure-transducers\"\u003edifferential measurement\u003c\/a\u003e applications in confined spaces. Configurable options include differential pressure ranges up to 300 PSI and various voltage or 4-20 mA loop power output signals. Furthermore, it's available in both male and female 1\/4\" NPT process connections. \u003cul\u003e \u003cli\u003edifferential pressures from 1 to 300 PSI\u003c\/li\u003e \u003cli\u003eline pressures up to 500 PSI\u003c\/li\u003e \u003cli\u003e316L SS diaphragm \/ oil filled sensor element\u003c\/li\u003e \u003cli\u003ewide operating temperature range\u003c\/li\u003e \u003cli\u003ebi-directional pressure ranges available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eVersatile Wet\/Wet Differential Pressure Transducer, Up to 300 PSID\u003c\/h3\u003e The CS14 Wet\/Wet Differential Pressure Transducer is the ideal solution for differential pressure measurement in industrial applications. For example, it's a great fit for filter condition monitoring, sealed tank level measurement, and \u003ca href=\"https:\/\/psctexas.com\/product-category\/flow\/\"\u003eflow measurement\u003c\/a\u003e across an orifice. This \u003ca href=\"https:\/\/psctexas.com\/product-category\/pressure\/\"\u003epressure sensor\u003c\/a\u003e features a fully welded design without any internal O-rings or seals. Due to its design, the CS14 allows for wet\/wet, wet\/dry, or dry\/dry applications. Differential pressures are available as low as 1 PSID all the way up to 300 PSID. In addition, it supports both uni-directional and bi-directional sensing, which makes the CS14 an excellent solution for a wide variety of applications. \u003ch3\u003eSpecifications for the CS14 Wet\/Wet Differential Pressure Sensor\u003c\/h3\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth style=\"text-align: center;\"\u003ePerformance\u003c\/th\u003e \u003cth style=\"text-align: center;\"\u003eThermal\u003c\/th\u003e \u003cth style=\"text-align: center;\"\u003eEnvironmental\u003c\/th\u003e \u003cth style=\"text-align: center;\"\u003eElectrical (Current)\u003c\/th\u003e \u003cth style=\"text-align: center;\"\u003eElectrical (Voltage)\u003c\/th\u003e \u003cth style=\"text-align: center;\"\u003eElectrical (Ratiometric)\u003c\/th\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd valign=\"top\"\u003e \u003cp style=\"text-align: left;\"\u003eAccuracy @ 77˚F (25˚C)\u003csup\u003e1\u003c\/sup\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ± 0.25% BFSL\u003c\/li\u003e \u003cli\u003e≤ ± 0.5% BFSL \u003csmall\u003e(2 PSI \u0026amp; below)\u003c\/small\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eStability (1 Year)\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ± 0.25% of FS\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003ePressure Cycles\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e4 million\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eMax Line Pressure\u003csup\u003e2\u003c\/sup\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e500 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eMax Differential Pressure\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e300 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eOverpressure\u003csup\u003e3\u003c\/sup\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e2X or 500 PSI, \u003csmall\u003ewhichever is less, configured differential pressure\u003c\/small\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eBurst Pressure\u003csup\u003e3\u003c\/sup\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e3X configured differential pressure\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003ctd valign=\"top\"\u003e \u003cp style=\"text-align: left;\"\u003eOperating Temperature\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e-40 to 221˚F\u003c\/li\u003e \u003cli\u003e-40 to 105˚C\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eCompensated Temperature\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e32 to 131˚F\u003c\/li\u003e \u003cli\u003e0 to 55˚C\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eStorage Temperature\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e-40 to 257˚F\u003c\/li\u003e \u003cli\u003e-40 to 125˚C\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eTC Zero\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ±1% of FS\u003c\/li\u003e \u003cli\u003e≤ ±2% of FS \u003csmall\u003e(2 PSI \u0026amp; below)\u003c\/small\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eTC Span\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ±1% of FS\u003c\/li\u003e \u003cli\u003e≤ ± 2% of FS \u003csmall\u003e(2 PSI \u0026amp; below)\u003c\/small\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003ctd valign=\"top\"\u003e \u003cp style=\"text-align: left;\"\u003eEMI\/RFI Protection\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003eYes\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/psctexas.com\/ip-rating-for-industrial-instrumentation\/\"\u003eIP Rating\u003csup\u003e4\u003c\/sup\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.iec.ch\/ip-ratings\" target=\"_blank\" rel=\"nofollow noopener\"\u003eIP65 minimum\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eVibration\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e10 g, 20 to 5000 Hz\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eShock\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e100 g, 11 msec, 1\/2 sine\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003ctd valign=\"top\"\u003e \u003cp style=\"text-align: left;\"\u003eOutputs\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e4-20 mA\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eExcitation\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e10-28 VDC\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eCurrent Consumption\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e20 mA, typical\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eOutput Load\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e0-800 Ohms @ 10-28 VDC\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eFrequency Response (min)\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e~250 Hz\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eZero Offset (of FS)\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ±0.5% typical, ±1% max\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eSpan Tolerance (of FS)\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ±0.5% typical, ±1% max\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003ctd valign=\"top\"\u003e \u003cp style=\"text-align: left;\"\u003eOutputs\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e1-5V 0-5V\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eExcitation\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e10-28VDC\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eCurrent Consumption\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e\u0026lt; 10 mA\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eOutput Load\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e5 K Ohms, min\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eFrequency Response (min)\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e~1 kHz\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eZero Offset (of FS)\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ±0.5% typical, ±1% max\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eSpan Tolerance (of FS)\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ±0.5% typical, ±1% max\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003ctd valign=\"top\"\u003e \u003cp style=\"text-align: left;\"\u003eOutputs\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e0.5-4.5V ratiometric\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eExcitation\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e5VDC +\/- 0.5V\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eCurrent Consumption\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e\u0026lt; 10 mA\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eOutput Load\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e5 K Ohms, min\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eFrequency Response (min)\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e~1 kHz\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eZero Offset (of FS)\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ±0.5% typical, ±1% max\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eSpan Tolerance (of FS)\u003c\/p\u003e \u003cul\u003e \u003cli style=\"text-align: left;\"\u003e≤ ±0.5% typical, ±1% max\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd colspan=\"6\"\u003e\n\u003csup\u003e1\u003c\/sup\u003eAccuracy includes non-linearity, hysteresis and non-repeatability. \u003csup\u003e2\u003c\/sup\u003eMax line pressure is the highest common mode pressure that can be applied to the sensor without damage. \u003csup\u003e3\u003c\/sup\u003eOverpressure and burst pressure are the maximum differential pressure that can be applied to the high or low side before damage to the sensor will occur. \u003csup\u003e4\u003c\/sup\u003eIP Rating is dependent on electrical termination selected. Contact factory for more information. IP Rating applies when electrical connector is attached with the appropriate ingress protection.\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch3\u003eConfiguration Guide\u003c\/h3\u003e \u003ch3\u003e\u003ca href=\"https:\/\/psctexas.com\/wp-content\/uploads\/2020\/06\/cs14-wet-wet-differential-pressure-transmitter-core-sensors-process-solutions-texas.jpg\"\u003e\u003cimg class=\"aligncenter wp-image-23680 size-full\" src=\"https:\/\/psctexas.com\/wp-content\/uploads\/2020\/06\/cs14-wet-wet-differential-pressure-transmitter-core-sensors-process-solutions-texas.jpg\" alt=\"cs14-wet\/wet-differential-pressure-transmitter-core-sensors-process-solutions-texas\" width=\"1000\" height=\"315\"\u003e\u003c\/a\u003e\u003c\/h3\u003e \u003ch3\u003eApprovals\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.trade.gov\/ce-marking#\" target=\"_blank\" rel=\"nofollow noopener\"\u003eCE\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.ul.com\/services\/restriction-hazardous-substances-directive-rohs-compliance-services\" target=\"_blank\" rel=\"nofollow noopener\"\u003eRoHS Compliant\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eApplications\u003c\/h3\u003e \u003cul\u003e \u003cli\u003efiltration\u003c\/li\u003e \u003cli\u003etank level monitoring\u003c\/li\u003e \u003cli\u003ecryogenic bulk tank level measurement\u003c\/li\u003e \u003c\/ul\u003e","brand":"Core Sensors","offers":[{"title":"Default Title","offer_id":45878372139139,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/1955\/0595\/files\/cs14-wet-wet-differential-pressure-sensor-core-sensors-psc-texas.png?v=1763385483"},{"product_id":"cs54-non-incendive-differential-pressure-transducer-1-50-psi","title":"CS54 Non-Incendive Differential Pressure Transducer, 1-50 PSI","description":"The CS54 Non-Incendive Differential Pressure Transducer is a high strength sensor for differential pressure measurements of liquids and gases in \u003ca href=\"https:\/\/psctexas.com\/ul-standards-for-hazardous-location-industrial-instrumentation\/\"\u003eClass I, Division 2 hazardous locations\u003c\/a\u003e. A \u003ca href=\"http:\/\/psctexas.com\/wetted-materials-options-for-pressure-sensors\/#316L\"\u003e316L SS oil filled sensor\u003c\/a\u003e element provides excellent stability over a wide operating temperature range. In addition, this \u003ca href=\"https:\/\/psctexas.com\/product-category\/pressure\/\"\u003epressure transducer\u003c\/a\u003e, from \u003ca href=\"https:\/\/psctexas.com\/brand\/core-sensors\/\"\u003eCore Sensors\u003c\/a\u003e, offers corrosion resistance against various liquids and gases. Differential pressure ranges up to 50 PSI are available with 1\/4\" MNPT or FNPT process connections. Caution must be taken when installing and operating \u003ca href=\"https:\/\/psctexas.com\/product-category\/pressure\/hazloc-pressure-transducers\"\u003ehazardous area pressure sensors\u003c\/a\u003e in known Class I, Division 2 hazardous locations. Please review the Non-Incendive Operating Instructions prior to installation. \u003cul\u003e \u003cli\u003eno conduit installation necessary\u003c\/li\u003e \u003cli\u003eavailable with a \u003ca href=\"http:\/\/psctexas.com\/turck-minifast-connection-for-class-1-div-2-hazardous-areas\/\"\u003eTurck Minifast connection\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003eCSA Class I, Division 2, Groups A, B, C, D T4 approval\u003c\/li\u003e \u003cli\u003edifferential pressures from 1 to 50 PSI\u003c\/li\u003e \u003cli\u003eline pressures up to 500 PSI\u003c\/li\u003e \u003cli\u003ebi-directional pressure ranges available\u003c\/li\u003e \u003cli\u003eassembly in New Jersey, USA\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eCS54 Non-Incendive Differential Pressure Sensor\u003c\/h3\u003e In an effort to simplify installation in Class I, Division 2 hazardous locations, the CS54 Non-Incendive Differential Pressure Transducer offers an integral Turck Minifast electrical connection. When combined with a CSA Division 2 approved \u003ca href=\"https:\/\/psctexas.com\/brand\/turck\/\"\u003eTurck\u003c\/a\u003e cordset and a Turck Lokfast Guard, there is no requirement for conduit to be installed over the cable.* This not only makes installation easy but also makes switching out sensors less cumbersome. We can supply all components as a complete package. You can \u003ca href=\"http:\/\/psctexas.com\/turck-minifast-connection-for-class-1-div-2-hazardous-areas\/\"\u003elearn more about the Turck Minifast electrical connection here: psctexas.com\/turck-minifast-connection-for-class-1-div-2-hazardous-areas\/\u003c\/a\u003e \u003cb\u003e*\u003c\/b\u003eWe recommend confirming hazardous location installation requirements with your local inspector as each installation is unique. \u003ch3\u003eModel Configuration Guide\u003c\/h3\u003e Not all configurations are available. Our sales team can recommend the closest available configuration based on your requirements. Contact us for configurations not shown. \u003ch3\u003e\u003ca href=\"https:\/\/psctexas.com\/wp-content\/uploads\/2020\/07\/CS54-Non-Incendive-Differential-Pressure-Transducer-Core-Sensors-Process-Solutions-Texas-Configurations.jpg\"\u003e\u003cimg class=\"aligncenter wp-image-23737 size-full\" src=\"https:\/\/psctexas.com\/wp-content\/uploads\/2020\/07\/CS54-Non-Incendive-Differential-Pressure-Transducer-Core-Sensors-Process-Solutions-Texas-Configurations.jpg\" alt=\"CS54-Non-Incendive-Differential-Pressure-Transducer-Core-Sensors-Process-Solutions-Texas-Configurations\" width=\"1000\" height=\"319\"\u003e\u003c\/a\u003e\u003c\/h3\u003e \u003ch3\u003eApprovals and Certifications\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.csagroup.org\" target=\"_blank\" rel=\"nofollow noopener\"\u003eCSA Class I, Division 2, Groups A, B, C, D T4\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/ww2.eagle.org\/en.html\" target=\"_blank\" rel=\"nofollow noopener\"\u003eABS (American Bureau of Shipping) approval\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.trade.gov\/ce-marking\" target=\"_blank\" rel=\"nofollow noopener\"\u003eCE\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eCommon Uses of the CS54 Non-Incendive Differential Pressure Transducer\u003c\/h3\u003e \u003cul\u003e \u003cli\u003efiltration\u003c\/li\u003e \u003cli\u003ecryogenic bulk tank \u003ca href=\"https:\/\/psctexas.com\/product-category\/level\/\"\u003elevel measurement\u003c\/a\u003e\n\u003c\/li\u003e \u003cli\u003ecompression systems\u003c\/li\u003e \u003cli\u003etest stands\u003c\/li\u003e \u003c\/ul\u003e","brand":"Core Sensors","offers":[{"title":"Default Title","offer_id":45878372335747,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/1955\/0595\/files\/CS54-Non-Incendive-Differential-Pressure-Transducer-Core-Sensors-Process-Solutions-Corp.png?v=1763385489"},{"product_id":"cs64-explosion-proof-differential-pressure-transducer","title":"CS64 Explosion Proof Differential Pressure Transducer","description":"\u003cul\u003e \u003cli\u003eCSA Class I, Division 1, Groups A, B, C, D, T4 Approval\u003c\/li\u003e \u003cli\u003econfigurable differential pressure ranges from 1 PSI up to 50 PSI\u003c\/li\u003e \u003cli\u003eline pressures up to 500 PSI\u003c\/li\u003e \u003cli\u003ewet\/wet\u003c\/li\u003e \u003cli\u003efactory seal stainless steel case  to withstand harsh environments\u003c\/li\u003e \u003cli\u003eassembly in New Jersey, USA\u003c\/li\u003e \u003c\/ul\u003e The CS64 Explosion Proof Differential Pressure Transducer is a high strength sensor for \u003ca href=\"https:\/\/psctexas.com\/product-category\/pressure\/differential-pressure-transducers\"\u003edifferential pressure measurements\u003c\/a\u003e of liquids and gases in Class I, Division 1 explosion-proof locations. The CS64, from \u003ca href=\"https:\/\/psctexas.com\/brand\/core-sensors\/\"\u003eCore Sensors\u003c\/a\u003e, features an all-welded, factory seal stainless steel construction and a minimum \u003ca href=\"https:\/\/psctexas.com\/ip-rating-for-industrial-instrumentation\/\"\u003eIP66 rating\u003c\/a\u003e. A 316L SS oil-filled sensor element provides excellent stability over a wide operating temperature range. Additionally, this offers corrosion resistance against various liquids and gases. A 1\/2\" Male NPT conduit fitting with 2 meters of 20AWG flying leads is standard. This fitting allows for easy installation of rigid metal conduit. Differential pressure ranges from 1 PSI up to 50 PSI are available with 1\/4\" Female NPT process connections. \u003ch3\u003eSpecifications for the CS64 Explosion Proof Differential Pressure Sensor\u003c\/h3\u003e \u003ctable\u003e \u003ctbody\u003e \u003ctr\u003e \u003cth style=\"text-align: center;\"\u003ePerformance\u003c\/th\u003e \u003cth style=\"text-align: center;\"\u003eThermal\u003c\/th\u003e \u003cth style=\"text-align: center;\"\u003eEnvironmental\u003c\/th\u003e \u003cth style=\"text-align: center;\"\u003eElectrical (Current)\u003c\/th\u003e \u003cth style=\"text-align: center;\"\u003eElectrical (Voltage)\u003c\/th\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd valign=\"top\"\u003e \u003cp style=\"text-align: left;\"\u003eAccuracy @ 25°C\u003csup\u003e1\u003c\/sup\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ± 0.25% BFSL\u003c\/li\u003e \u003cli\u003e≤ ± 0.5% BFSL \u003csmall\u003e(2 PSI and below)\u003c\/small\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eStability (1 Year)\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ± 0.25% of FS\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003ePressure Cycles\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e4 million\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eMax Line Pressure\u003csup\u003e2\u003c\/sup\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e500 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eMax Differential Pressure\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e50 PSI\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eOverpressure\u003csup\u003e3\u003c\/sup\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e2X or 500 PSI, \u003csmall\u003ewhichever is less, configured differential pressure range\u003c\/small\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eBurst Pressure\u003csup\u003e3\u003c\/sup\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e3X configured differential pressure range\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003ctd valign=\"top\"\u003e \u003cp style=\"text-align: left;\"\u003eOperating Temperature\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e-40 to 185˚F\u003c\/li\u003e \u003cli\u003e-40 to 85˚C\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eMedia Temperature\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e-40 to 248˚F\u003c\/li\u003e \u003cli\u003e-40 to 120˚C\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eCompensated Temperature\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e5 to 149˚F\u003c\/li\u003e \u003cli\u003e-15 to 65˚C\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eStorage Temperature\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e-40 to 257˚F\u003c\/li\u003e \u003cli\u003e-40 to 125˚C\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eTC Zero\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ± 1% of FS\u003c\/li\u003e \u003cli\u003e≤ ± 2% of FS \u003csmall\u003e(2 PSI and below)\u003c\/small\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eTC Span\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ± 1% of FS\u003c\/li\u003e \u003cli\u003e≤ ± 2% of FS \u003csmall\u003e(2 PSI and below)\u003c\/small\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003ctd valign=\"top\"\u003e \u003cp style=\"text-align: left;\"\u003eEMI\/RFI Protection\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003eYes\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/psctexas.com\/ip-rating-for-industrial-instrumentation\/\"\u003eIP Rating\u003c\/a\u003e\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.iec.ch\/ip-ratings\" target=\"_blank\" rel=\"nofollow noopener\"\u003eIP66\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eVibration\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e10 g, 20 to 2000 Hz\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eShock\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e100 g, 11 msec, 1\/2 sine\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003ctd valign=\"top\"\u003e \u003cp style=\"text-align: left;\"\u003eOutputs\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e4-20 mA\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eExcitation\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e10-28 VDC\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eCurrent Consumption\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e20 mA, typical\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eOutput Load\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e0-800 Ohms @ 10-28 VDC\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eFrequency Response (min)\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e~250 Hz\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eZero Offset (of FS)\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ±0.5% typical, ±1% max\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eSpan Tolerance (of FS)\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ±0.5% typical, ±1% max\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003ctd valign=\"top\"\u003e \u003cp style=\"text-align: left;\"\u003eOutputs\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e1-5 V\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eExcitation\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e10-28 VDC\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eCurrent Consumption\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e\u0026lt; 10 mA\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eOutput Load\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e5 K Ohms, min\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eFrequency Response (min)\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e~1 kHz\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eZero Offset (of FS)\u003c\/p\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003e≤ ±0.5% typical, ±1% max\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003eSpan Tolerance (of FS)\u003c\/p\u003e \u003cul\u003e \u003cli style=\"text-align: left;\"\u003e≤ ±0.5% typical, ±1% max\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd colspan=\"5\"\u003e\n\u003csup\u003e1\u003c\/sup\u003eAccuracy includes non-linearity, hysteresis and non-repeatability. \u003csup\u003e2\u003c\/sup\u003eMax line pressure is the highest common mode pressure that can be applied to the sensor without damage. \u003csup\u003e3\u003c\/sup\u003eOverpressure and burst pressure are the maximum differential pressure that can be applied to the high or low side before damage to the sensor will occur.\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch3\u003eApprovals and Certifications\u003c\/h3\u003e \u003ch5\u003e\u003ca href=\"https:\/\/psctexas.com\/ul-standards-for-hazardous-location-industrial-instrumentation\/\"\u003eExplosion-Proof\u003c\/a\u003e\u003c\/h5\u003e \u003cul\u003e \u003cli\u003eCSA Class I, Division 1, Groups A, B, C, D, T4\u003c\/li\u003e \u003cli\u003eClass I Zone 1 AEx db IIC T4 Gb\u003c\/li\u003e \u003cli\u003eEx db IIC T4 Gb\u003c\/li\u003e \u003c\/ul\u003e \u003ch5\u003e\u003ca href=\"https:\/\/psctexas.com\/ul-standards-for-hazardous-location-industrial-instrumentation\/\"\u003eDust Ignition-Proof\u003c\/a\u003e\u003c\/h5\u003e \u003cul\u003e \u003cli\u003eClass II, Division 1, Groups E, F and G, T135°C\u003c\/li\u003e \u003cli\u003eZone 21 AEx tb IIIC T135°C Db\u003c\/li\u003e \u003cli\u003eEx tb IIIC T135°C Db\u003c\/li\u003e \u003c\/ul\u003e \u003ch5\u003eOther Approvals\u003c\/h5\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.trade.gov\/ce-marking\"\u003eCE\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eConfiguration Guide\u003c\/h3\u003e \u003ca href=\"https:\/\/psctexas.com\/wp-content\/uploads\/2023\/08\/cs64-explosion-proof-pressure-sensors-configuation-guide-psc-texas.jpg\"\u003e\u003cimg class=\"aligncenter wp-image-23555 size-full\" src=\"https:\/\/psctexas.com\/wp-content\/uploads\/2023\/08\/cs64-explosion-proof-pressure-sensors-configuation-guide-psc-texas.jpg\" alt=\"cs64-explosion-proof-pressure-sensors-configuation-guide-psc-texas\" width=\"1000\" height=\"335\"\u003e\u003c\/a\u003e \u003ch3\u003eCommon Uses of Explosion Proof Differential Pressure Sensors\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/psctexas.com\/category\/industries\/oil-and-energy\/\"\u003ewellhead pressure measurement\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/psctexas.com\/category\/industries\/oil-and-energy\/\"\u003eoil exploration\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/psctexas.com\/category\/industries\/oil-and-energy\/\"\u003enatural gas compression\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/psctexas.com\/category\/industries\/oil-and-energy\/\"\u003epipeline equipment\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/psctexas.com\/category\/industries\/utilities\/\"\u003epower generation\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e","brand":"Core Sensors","offers":[{"title":"Default Title","offer_id":45878421225603,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/1955\/0595\/files\/cs64-explosion-proof-differential-pressure-transducer-core-sensors-distributor-psc-texas.png?v=1763386410"},{"product_id":"compact-orifice-plate-flow-meter","title":"Compact Orifice Plate Flow Meter","description":"The compact orifice plate with OPTIBAR DP transmitter is an economic \u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/flow-wastewater\/differential-pressure\/\"\u003edifferential pressure (DP) flow meter\u003c\/a\u003e for a broad range of \u003ca href=\"https:\/\/psctexas.com\/category\/industries\/utilities\/wastewater-water-treatment\/\"\u003emunicipal applications\u003c\/a\u003e. The integral orifice plate is a one-piece design per \u003ca href=\"https:\/\/www.iso.org\/standard\/79180.html\" target=\"_blank\" rel=\"nofollow noopener\"\u003eISO 5167-2\u003c\/a\u003e or ASME MFC-3M, consisting of a compact orifice plate, a sandwich meter body, impulse lines, and a connection flange. This is a complete DP flow solution with an integral orifice plate, manifold, and differential pressure transmitter. It comes preassembled, preconfigured, and pressure tested, so it's ready for immediate commissioning. Furthermore, there is absolutely no need for routing of impulse lines, valves, or supports. In this way, material costs and installation efforts are significantly reduced. Due to its versatile design, this compact orifice plate \u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/flow-wastewater\/\"\u003eflow meter\u003c\/a\u003e is suitable for many municipal processes. Redundant versions are available for safety related applications. The sophisticated \u003ca href=\"https:\/\/psctexas.com\/product\/optibar-dp-7060-dp-transmitter\/\"\u003eOPTIBAR DP 7060\u003c\/a\u003e and the compact \u003ca href=\"https:\/\/psctexas.com\/product\/optibar-dp-3050-dp-pressure-transmitter\/\"\u003eOPTIBAR DP 3050\u003c\/a\u003e DP transmitters, from \u003ca href=\"https:\/\/psctexas.com\/brand\/krohne\/\"\u003eKROHNE\u003c\/a\u003e, are the perfect companion products for this differential pressure flow meter solution. They are 3D linearized and also ensure advanced performance even at high static pressures. The OPTIBAR DP series has an outstanding long-term stability and a low total cost of ownership with a reduced need for field calibrations. \u003cimg class=\"alignright wp-image-25396 size-full\" style=\"width: 300px;\" src=\"https:\/\/psctexas.com\/wp-content\/uploads\/2024\/04\/KROHNE-compact-orifice-plate-differential-pressure-flow-dp-optibar-7060-process-solutions-corp.jpg\" alt=\"KROHNE-compact-orifice-plate-differential-pressure-flow-dp-optibar-7060-process-solutions-corp\" width=\"684\" height=\"750\"\u003e \u003ch3 style=\"text-align: left;\"\u003eFeatures of This Compact Orifice Plate Flow Meter*\u003c\/h3\u003e \u003cul\u003e \u003cli style=\"text-align: left;\"\u003ereduced installation costs: no installation of further components such as valves, DP transmitter, impulse lines, supports\u003c\/li\u003e \u003cli style=\"text-align: left;\"\u003eno external impulse lines: reduced risk of leakage\u003c\/li\u003e \u003cli style=\"text-align: left;\"\u003estandardized flow element according to ISO 5167-2\u003c\/li\u003e \u003cli style=\"text-align: left;\"\u003elow total cost of ownership due to reduced engineering, commissioning, and installation costs\u003c\/li\u003e \u003cli style=\"text-align: left;\"\u003ereduced need for recalibration in the field through advanced 3-D linearized OPTIBAR DP transmitters\u003c\/li\u003e \u003cli style=\"text-align: left;\"\u003ecomplete flow meter solution with compact orifice plate, manifold, DP transmitter, sizing, and documentation from a single source\u003c\/li\u003e \u003cli style=\"text-align: left;\"\u003estandard material: \u003ca href=\"https:\/\/psctexas.com\/wetted-materials-options-for-pressure-sensors\/#316L\"\u003e316\/316L\u003c\/a\u003e, other materials also available upon request\u003c\/li\u003e \u003cli style=\"text-align: left;\"\u003eredundant versions, pressure, and temperature compensated versions available\u003c\/li\u003e \u003cli style=\"text-align: left;\"\u003eredundancy available (1oo2, 2oo3)\u003c\/li\u003e \u003cli style=\"text-align: left;\"\u003e\n\u003ca href=\"https:\/\/psctexas.com\/product-tag\/hart\/\"\u003eHART 7\u003c\/a\u003e, \u003ca href=\"https:\/\/www.fieldcommgroup.org\/technologies\/foundation-fieldbus\" target=\"_blank\" rel=\"nofollow noopener\"\u003eFoundation fieldbus\u003c\/a\u003e, and \u003ca href=\"https:\/\/us.profinet.com\/profibus-pa-overview-and-description\/\" target=\"_blank\" rel=\"nofollow noopener\"\u003eProfibus-PA\u003c\/a\u003e communication options\u003c\/li\u003e \u003cli style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/www.iec.ch\/functional-safety\" target=\"_blank\" rel=\"nofollow noopener\"\u003eSIL 2\/3 certified versions\u003c\/a\u003e\u003c\/li\u003e \u003cli style=\"text-align: left;\"\u003e\u003ca href=\"https:\/\/psctexas.com\/atex-vs-iecex-difference-explained\/\"\u003eEx ia, Ex d approvals\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"text-align: left;\"\u003e*Product features and options depend on device configuration. Contact us to make sure that your functionality requirements are available in a single device.\u003c\/p\u003e \u003ch3\u003eCommon \u003ca href=\"https:\/\/psctexas.com\/category\/industries\/utilities\/wastewater-water-treatment\/\"\u003eWater and Wastewater Applications\u003c\/a\u003e for \u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/flow-wastewater\/differential-pressure\/\"\u003eDifferential Pressure Flow Meters\u003c\/a\u003e\n\u003c\/h3\u003e \u003cul\u003e \u003cli style=\"text-align: left;\"\u003eflow applications with conductive and also non-conductive liquids, gases, and steam\u003c\/li\u003e \u003cli style=\"text-align: left;\"\u003eproduced water flow measurement\u003c\/li\u003e \u003cli style=\"text-align: left;\"\u003ewater and wastewater treatment, for example, aeration\u003c\/li\u003e \u003cli style=\"text-align: left;\"\u003edemineralized water\u003c\/li\u003e \u003cli style=\"text-align: left;\"\u003esteam flow and other utilities\u003c\/li\u003e \u003c\/ul\u003e","brand":"KROHNE","offers":[{"title":"3\" DN080","offer_id":45878424010883,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"4\" DN100","offer_id":45878424043651,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"6\" DN150","offer_id":45878424076419,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"8\" DN200","offer_id":45878424109187,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true},{"title":"10\" DN250","offer_id":45878424141955,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/1955\/0595\/files\/KROHNE-compact-orifice-flow-meter-optibar-dp-7060-differential-pressure-flow-measurement-psc-texas.png?v=1763386437"},{"product_id":"optibar-dp-7060-dp-transmitter","title":"OPTIBAR DP 7060, DP Transmitter","description":"The OPTIBAR DP 7060 is a \u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/flow-wastewater\/differential-pressure\/\"\u003edifferential pressure (DP) transmitter\u003c\/a\u003e with integrated absolute pressure measurement. Furthermore, it offers a high degree of modularity for various flow, hydrostatic level, or process pressure measurements in \u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/\"\u003emunicipal water and wastewater applications\u003c\/a\u003e. For DP flow measurements, this DP transmitter can combine with \u003ca href=\"https:\/\/psctexas.com\/brand\/krohne\/\"\u003eKROHNE\u003c\/a\u003e primary elements, such as our \u003ca href=\"https:\/\/psctexas.com\/product\/compact-orifice-plate-flow-meter\/\"\u003ecompact orifice plate\u003c\/a\u003e, \u003ca href=\"https:\/\/psctexas.com\/product\/integral-orifice-dp-flow-meter-run-assembly\/\"\u003eintegral orifice run assembly\u003c\/a\u003e, or pitot tubes. This DP pressure transmitter features the proven-in-use DP transmitter technology of the OPTIBAR series, but comes with high-end options that are not available on the compact \u003ca href=\"https:\/\/psctexas.com\/product\/optibar-dp-3050-dp-pressure-transmitter\/\"\u003eOPTIBAR DP 3050\u003c\/a\u003e. Equipped with diaphragm seals, it is an ideal choice for hydrostatic level, interface, density, as well as demanding DP applications. Featuring a quick response time of just 125 ms, this DP transmitter offers high accuracy in addition to high measurement stability under all process conditions. \u003cul style=\"text-align: left;\"\u003e \u003cli\u003every good repeatability and long-term stability of the measuring signal\u003c\/li\u003e \u003cli\u003emeasuring ranges down to 10 mbar (0.145 psi) even without electronic spreading\u003c\/li\u003e \u003cli\u003euniversal modularity of the entire OPTIBAR process series\u003c\/li\u003e \u003cli\u003edisplay and adjustment module with optional \u003ca href=\"https:\/\/www.bluetooth.com\" target=\"_blank\" rel=\"nofollow noopener\"\u003eBluetooth\u003c\/a\u003e communication for remote measured value indication, adjustments, and diagnostics\u003c\/li\u003e \u003cli\u003e2-wire, 4-20 mA \/ \u003ca href=\"https:\/\/psctexas.com\/product-tag\/hart\/\"\u003eHART\u003c\/a\u003e, \u003ca href=\"https:\/\/www.fieldcommgroup.org\/technologies\/foundation-fieldbus\" target=\"_blank\" rel=\"nofollow noopener\"\u003eFOUNDATION Fieldbus\u003c\/a\u003e, \u003ca href=\"https:\/\/www.profibus.com\" target=\"_blank\" rel=\"nofollow noopener\"\u003eProfibus-PA\u003c\/a\u003e, Bluetooth\u003c\/li\u003e \u003cli\u003equick start-up for all applications\u003c\/li\u003e \u003cli\u003eintegrated absolute pressure measurement\u003c\/li\u003e \u003c\/ul\u003e Our OPTIBAR DP transmitters are the only DP transmitters on the market that are capable of carrying out a total 3D linearization of its differential pressure transmitter. For robust and accurate differential pressure measurement, even under changing process conditions, each OPTIBAR DP 7060 differential pressure transmitter is linearized in all three dimensions during calibration such as: differential pressure, ambient temperature, and static pressure. Since the full operating range, as specified, is covered, an utmost stable and accurate measurement under all process conditions is guaranteed. \u003ch3 style=\"text-align: left;\"\u003eFeatures of the OPTIBAR 7060 DP Transmitter*\u003c\/h3\u003e \u003ca href=\"https:\/\/psctexas.com\/wp-content\/uploads\/2024\/06\/KROHNE-OPTIBAR-DP-7060-DP-Transmitter-Low-Flow-Meter-Differential-Pressure-Flow-Measurement-Water-Wastewater-PSC-Texas.jpg\"\u003e\u003cimg class=\"alignright wp-image-25938 size-full\" style=\"width: 400px;\" src=\"https:\/\/psctexas.com\/wp-content\/uploads\/2024\/06\/KROHNE-OPTIBAR-DP-7060-DP-Transmitter-Low-Flow-Meter-Differential-Pressure-Flow-Measurement-Water-Wastewater-PSC-Texas.jpg\" alt=\"KROHNE-OPTIBAR-DP-7060-DP-Transmitter-Low-Flow-Meter-Differential-Pressure-Flow-Measurement-Water-Wastewater-PSC-Texas\" width=\"1000\" height=\"803\"\u003e\u003c\/a\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003eoutstanding temperature and static pressure stability even under harsh conditions\u003c\/li\u003e \u003cli\u003eunique 3D linearization of transmitter: compensation for all influencing factors at virtually all possible combinations\u003c\/li\u003e \u003cli\u003every good repeatability as well as long-term stability of the measuring signal\u003c\/li\u003e \u003cli\u003eintegrated absolute pressure measurement for lowest possible influence of static pressure changes on the signal while providing an additional process signal\u003c\/li\u003e \u003cli\u003every quick step response times \u0026lt;125 ms\u003c\/li\u003e \u003cli\u003ecombined DP, SP as well as T measurements for maximum process security\u003c\/li\u003e \u003cli\u003ecompact measuring cell with low weight\u003c\/li\u003e \u003cli\u003eturndown ratio up to 100:1, also higher upon request\u003c\/li\u003e \u003cli\u003eextensive diagnostic and parameterization functions on the display in addition to the adjustment module or the user-friendly and free DTMs\u003c\/li\u003e \u003cli\u003ewireless device commissioning, verification, and monitoring with the OPTICHECK Pressure Mobile app\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/psctexas.com\/product-tag\/hazloc-rated\/\"\u003eEx ia, Ex d approvals\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.ul.com\/services\/functional-safety\" target=\"_blank\" rel=\"nofollow noopener\"\u003eSIL 2\/3\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e *Product features and options depend on device configuration. Contact us to make sure that your functionality requirements are available in a single device. \u003ch3 style=\"text-align: left;\"\u003eCommon Uses of a DP Transmitter\u003c\/h3\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003epressure monitoring of filters and pumps with overload protection of up to 160 bar (2320 psi)\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/level-water-treatment\/\"\u003elevel measurement\u003c\/a\u003e of liquids in pressurized vessels\u003c\/li\u003e \u003cli\u003e\n\u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/flow-wastewater\/\"\u003eflow measurement\u003c\/a\u003e of gases, vapors, and liquids with DP transmitters\u003c\/li\u003e \u003cli\u003emeasurement of density and separating layers of liquids in tanks\u003c\/li\u003e \u003c\/ul\u003e","brand":"KROHNE","offers":[{"title":"Default Title","offer_id":45878424862851,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/1955\/0595\/files\/KROHNE-optibar-dp-7060-differential-pressure-dp-flow-measurement-meter-process-solutions-corp.png?v=1763386449"},{"product_id":"optibar-dp-3050-dp-pressure-transmitter","title":"OPTIBAR DP 3050 DP Pressure Transmitter","description":"\u003cp\u003eThe OPTIBAR DP 3050 is a \u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/flow-wastewater\/differential-pressure\/\"\u003edifferential pressure transmitter\u003c\/a\u003e with integrated absolute pressure measurement. It is an ideal choice for general \u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/flow-wastewater\/\"\u003eflow\u003c\/a\u003e, \u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/level-water-treatment\/\"\u003elevel\u003c\/a\u003e, as well as differential pressure applications in the \u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/\"\u003emunicipal water and wastewater industries\u003c\/a\u003e. This DP pressure transmitter is currently the most \u003ca href=\"https:\/\/psctexas.com\/product-tag\/compact-design\/\"\u003ecompact pressure transmitter\u003c\/a\u003e in the market worldwide. For this reason, it is particularly suitable for space-saving installation in applications with limited space. This compact DP pressure transmitter features the proven-in-use DP transmitter technology of the OPTIBAR series, but comes without the high-end options of the more advanced \u003ca href=\"https:\/\/psctexas.com\/product\/optibar-dp-7060-dp-transmitter\/\"\u003eOPTIBAR DP 7060\u003c\/a\u003e. In this way, the OPTIBAR DP 3050 is also one of the most cost-effective DP pressure transmitters in the market. For DP flow measurements, it can combine with \u003ca href=\"https:\/\/psctexas.com\/brand\/krohne\/\"\u003eKROHNE\u003c\/a\u003e primary elements, such as our \u003ca href=\"https:\/\/psctexas.com\/product\/compact-orifice-plate-flow-meter\/\"\u003ecompact orifice plate\u003c\/a\u003e, \u003ca href=\"https:\/\/psctexas.com\/product\/integral-orifice-dp-flow-meter-run-assembly\/\"\u003eintegral orifice run assembly\u003c\/a\u003e, or pitot tubes. Equipped with diaphragm seals, it is the right choice for hydrostatic level as well as general purpose DP measurements.\u003c\/p\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003ereference accuracy ± 0.1%\u003c\/li\u003e\n\u003cli\u003edifferential pressure measuring ranges from 100 mbar to 16 bar (1.45 to 232 psi)\u003c\/li\u003e\n\u003cli\u003eprocess temperature: -40 to 302˚F (-40 to 105˚C)\u003c\/li\u003e\n\u003cli\u003e2-wire 4-20 mA output with fully implemented \u003ca href=\"https:\/\/www.fieldcommgroup.org\/technologies\/hart\" rel=\"nofollow noopener\" target=\"_blank\"\u003eHART 7.5 communication\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 style=\"text-align: left;\"\u003eCompact DP Transmitter - OPTIBAR DP 3050\u003c\/h3\u003e\n\u003cp\u003eOur OPTIBAR DP transmitters are the only DP transmitters on the market that are capable of carrying out a total 3D linearization of its differential pressure transmitter. For robust and accurate differential pressure measurement, even under changing process conditions, each OPTIBAR DP 3050 differential pressure transmitter is linearized in all three dimensions during calibration such as: differential pressure, ambient temperature, and static pressure. Since the full operating range, as specified, is covered, an utmost stable and accurate measurement under all process conditions is guaranteed.\u003c\/p\u003e\n\u003ch3 style=\"text-align: left;\"\u003eFeatures of the OPTIBAR DP 3050 DP Transmitter*\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/psctexas.com\/wp-content\/uploads\/2024\/06\/KROHNE-optibar-dp-3050-DP-Pressure-Transmitter-Flow-Meter-Level-Sensor-Water-Wastewater-Process-Solutions-Texas.jpg\"\u003e\u003cimg class=\"alignright wp-image-25945 size-full\" style=\"width: 400px;\" src=\"https:\/\/psctexas.com\/wp-content\/uploads\/2024\/06\/KROHNE-optibar-dp-3050-DP-Pressure-Transmitter-Flow-Meter-Level-Sensor-Water-Wastewater-Process-Solutions-Texas.jpg\" alt=\"KROHNE-optibar-dp-3050-DP-Pressure-Transmitter-Flow-Meter-Level-Sensor-Water-Wastewater-Process-Solutions-Texas\" width=\"1000\" height=\"590\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003erobust as well as space-saving stainless steel construction (316L \/ 1.4404)\u003c\/li\u003e\n\u003cli\u003etotal 3D linearization for highest accuracy and stability under all process conditions\u003c\/li\u003e\n\u003cli\u003eintegrated static pressure measurement for additional process information\u003c\/li\u003e\n\u003cli\u003eoutstanding temperature stability even under harsh conditions\u003c\/li\u003e\n\u003cli\u003eexcellent repeatability and long-term stability\u003c\/li\u003e\n\u003cli\u003ecombined DP, SP, in addition to T measurements for maximum process reliability\u003c\/li\u003e\n\u003cli\u003esuitable for OPTIBAR DSD diaphragm seal assembly\u003c\/li\u003e\n\u003cli\u003ecan be combined with many primary elements of the OPTIBAR OS and OPTIBAR PT series for flow measurement\u003c\/li\u003e\n\u003cli\u003eoptional display and adjustment module with intuitive user concept\u003c\/li\u003e\n\u003cli\u003einternal push buttons for quick parameter set up\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/psctexas.com\/product-tag\/hazloc-rated\/\"\u003eex ia approvals\u003c\/a\u003e for gas and also dust atmosphere\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Product features and options depend on device configuration. Contact us to make sure that your functionality requirements are available in a single device.\u003c\/p\u003e\n\u003ch3 style=\"text-align: left;\"\u003eCommon Uses of DP Pressure Transmitters\u003c\/h3\u003e\n\u003cul style=\"text-align: left;\"\u003e\n\u003cli\u003edifferential pressure measurement of gases, vapors, and liquids\u003c\/li\u003e\n\u003cli\u003epressure monitoring of filters in addition to pumps with overload protection of up to 160 bar (2321 psi)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/level-water-treatment\/\"\u003elevel measurement\u003c\/a\u003e of liquids in open and pressurized vessels\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/flow-wastewater\/\"\u003eflow measurement\u003c\/a\u003e of gases, vapors, and liquids\u003c\/li\u003e\n\u003cli\u003eapplications with tight installation spaces\u003c\/li\u003e\n\u003cli\u003eenvironmental technology\u003c\/li\u003e\n\u003cli\u003emunicipal water and wastewater\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KROHNE","offers":[{"title":"Default Title","offer_id":45878424895619,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/1955\/0595\/files\/KROHNE-optibar-dp-3050-differential-pressure-transmitter-flow-level-interface-process-solutions-corp-texas.png?v=1763386450"},{"product_id":"averaging-pitot-tube-flow-meter","title":"Averaging Pitot Tube Flow Meter","description":"The averaging pitot tube flow meter is a differential pressure flow meter that requires the least installation effort of all DP flow meters. It is cost-effective and suitable for a variety of applications in the municipal water and wastewater industry. Its low remaining pressure loss as well as its bi-directional flow capabilities make it ideal for water, sea water, condensate, cooling water, saturated and superheated steam, and many other liquids and gases. It is also suitable for dust-laden gases at high-temperatures. Furthermore, this averaging pitot tube flow meter, from KROHNE, covers big diameters, round and rectangular pipes, and ducts. It requires only short straight inlet\/outlet pipe sections (7D\/3D). Due to the low flow profile constriction, it generates only a minimal residual pressure loss. We offer the complete DP flow solution with averaging pitot tube, valve, manifold, and DP transmitter. They come pre-assembled, ready for operation, and only need a single flange or weld-on fitting for installation in a process line. This reduces engineering and installation efforts as well as eliminating the need for routing of impulse lines, valves, and supports. Retrofit and retractable as well as pressure or temperature-compensated versions with flow computing are also available. \u003ch3 style=\"text-align: left;\"\u003eDP Pressure Transmitters for Flow Measurement\u003c\/h3\u003e \u003ca href=\"https:\/\/psctexas.com\/product\/optibar-dp-7060-dp-transmitter\/\"\u003e\u003cimg class=\"alignright wp-image-25936 size-full\" style=\"width: 300px;\" src=\"https:\/\/psctexas.com\/wp-content\/uploads\/2018\/07\/KROHNE-optibar-dp-7060-differential-pressure-dp-flow-measurement-meter-process-solutions-corp.png\" alt=\"KROHNE-optibar-dp-7060-differential-pressure-dp-flow-measurement-meter-process-solutions-corp\" width=\"500\" height=\"500\"\u003e\u003c\/a\u003e The sophisticated \u003ca href=\"https:\/\/psctexas.com\/product\/optibar-dp-7060-dp-transmitter\/\"\u003eOPTIBAR DP 7060\u003c\/a\u003e and \u003ca href=\"https:\/\/psctexas.com\/product\/optibar-dp-3050-dp-pressure-transmitter\/\"\u003eOPTIBAR DP 3050\u003c\/a\u003e DP transmitters are the perfect companion for this \u003ca href=\"https:\/\/psctexas.com\/product-category\/water-treatment\/flow-wastewater\/differential-pressure\/\"\u003eDP flow meter\u003c\/a\u003e solution. They are 3D linearized and also ensure advanced performance even at high static pressures. The OPTIBAR DP series has outstanding long-term stability and a low total cost of ownership while reducing the need for field calibrations. \u003ch3\u003eFeatures of the Averaging Pitot Tube Flow Meter for DP Flow Measurement*\u003c\/h3\u003e \u003cul style=\"text-align: left;\"\u003e \u003cli\u003efast and easy installation without additional engineering, impulse lines and supports – allowing perfect retrofit capabilities\u003c\/li\u003e \u003cli\u003eaveraging flow profile for shortest in- and outlet runs\u003c\/li\u003e \u003cli\u003esymmetrical design allows bidirectional flow measurement\u003c\/li\u003e \u003cli\u003elow TCO due to reduced engineering, commissioning and installation costs\u003c\/li\u003e \u003cli\u003ereduced need for recalibration in the field through advanced 3-D linearized OPTIBAR DP transmitters\u003c\/li\u003e \u003cli\u003ecomplete flow meter solution with averaging pitot tube, manifold, DP transmitter from a single source\u003c\/li\u003e \u003cli\u003eHART 7, FOUNDATION fieldbus and Profibus-PA communication options\u003c\/li\u003e \u003cli\u003eSIL 2\/3 certified versions\u003c\/li\u003e \u003cli\u003eEx ia, Ex d approvals\u003c\/li\u003e \u003cli\u003eredundant versions as well as pressure and temperature compensated versions available\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eCommon Uses of DP Flow Meters\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eprocess flows of water, demiwater, gases, and also steam\u003c\/li\u003e \u003cli\u003eretrofit flow meter installations\u003c\/li\u003e \u003cli\u003eutilities and steam\u003c\/li\u003e \u003cli\u003ecooling water lines\u003c\/li\u003e \u003c\/ul\u003e","brand":"KROHNE","offers":[{"title":"Default Title","offer_id":45878424961155,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/1955\/0595\/files\/KROHNE-Averaging-Pitot-Tube-Flow-Meter-optibar-dp-7060-DP-Flow-Meter-Process-Solutions-Corp-Texas_38883d10-7edc-433b-816a-10f938bb3fe5.png?v=1763386451"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0655\/1955\/0595\/collections\/CS54-NonIncendive-Differential-Pressure-Transmitter-Hazardous-Area-Core-Sensors-Distributor-Process-Solutions-Texas.png?v=1764863002","url":"https:\/\/www.psctexas.shop\/collections\/differential-pressure-transducers.oembed","provider":"Process Solutions Corp.","version":"1.0","type":"link"}